Just a simple wall mounted rolling pin holder I made at the request of my girlfriend for her grandmas old rolling pin. I'm trying to learn CAD so it was a good opportunity to make something not super complex for something to do :) Her rolling pin is 60mm in diameter and it fits with a little bit of play so anything close to that should work but obviously you should be able to scale this model a little bit no problem :) 

The holes are 1.71mm by default and I have it hung up with three small nails, and it holds super sturdy mostly just in drywall and the hook itself is plenty strong just printed in some old sunlu matte pla I had. Zero play or flex with how it's printed and with a heavy wooden rolling pin Must be printed in the orientation it's in by default or it will not be strong enough to safely hold a heavy wooden rolling pin! I know it's just a rolling pin holder, but I don't want somebody laying it flat because they have a bigger printer only to have it snap and have their rolling pin fall on their head lol. 

I had no trouble printing this but it is tall so make sure you PRINT ON SILENT MODE or just set the speeds super slow in the profile or change volumetric limit doesn't matter which way you do it just don't print it fast or it will probably fail. And don't mess with the support settings or it will probably fail as well. 

This is the first thing I've ever posted and I'm very new to CAD as you can see lol so go easy on me…. but hopefully it works for you works for me perfectly 👍