Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 63.44x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic BambuLab Green Transmission Distance: 2
    PLA Hatchbox Purple Transmission Distance: 2.6
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to BambuLab Green
    At layer #8 (0.72mm) swap to Purple
    At layer #10 (0.88mm) swap to Orange
    At layer #14 (1.2mm) swap to Yellow for the rest.