Magnetic Fidget Slider

This design requires a total of 8 magnets, sized 6x3 mm — four for each half.

For a more and stronger snapping action, use N52-grade magnets.

Printing Guidelines:

• Use a 0.2 mm layer height for the main body.
• For improved finish on the top plate, go with 0.1 mm layer height (0.2 mm is acceptable if needed).
• No supports are necessary for any part of the print.

Assembly Instructions:

Secure the magnets into the main housing using glue. Once set, attach the top plate with adhesive.

Repeat the same process for the second half, making sure to align the magnet polarities correctly for smooth operation.