This adapter ring allows you to add a drilling table for your Wabeco drilling stand. The ring requires the circular drilling stand from Wabeco.

Printed with PLA & 40% infill for rigidity. For printing the overlapping ring you need to add supports.

I used a wooden 25mm multiplex birch plate. For fixing the ring to multiplex plate I used 4.5x20mm wood screws.

I fixed the Wabeco aluminium cast drilling table to the multiplex plate with M8 screws and drive-in nuts on the top.

Alternatively you can use the M5 holes in the ring and cut a thread into the Wabeco aluminium cast drill table.

Creality

Ender 3

No

Yes

230

40