Stevenson screen with Filter. I used SHT30 and BMP280 with Wemos D1 Mini with tasmota sensor firmware.
Filter was cut from out layer of surgical mask to provide dust and splash protection due to Hydrophobic properties.

Rotate STL accordingly to print without support ( i think STLs other than shield and sensor cover need rotation).

Assembly Instruction :
1) Wrap filter around sensor filter cap, put printed pin on slot to seal filter ends and secure with zip ties.
2) Transparent gluegun stick can be used to glue sensors.
3) For securing wemos d1 mini slot baseplate with screws, slightly heat screws before screwing them.