Summary

For use with DollaTek-style endstops.
Mount in the corner nearest the box with the electronics.

Recommended/mandatory GBRL parameters.
$22=1
$23=2
$24=75.
$25=1000.

Check Melvins awesome wiki for more info.

Endstops are mounted with short M3-bolts (e.g. M3x8).

The holes are tapered, I´d recommend putting a M3-tap through the holes altough it might be possible to force the M3 bolts directly into the holes.

The tower is mounted to the frame using short M5-bolts.
I´ve printed and used "Dist.stl" since my bolts were too long, it´s a spacer made for M5-bolts.

Remember to use eye protection while lasering!