A stress-relieving toy that's hard to put down! Printed in one piece, it can be used right after removing it from the print bed

Note:The vertical hinges will be rather stiff after printing, but they will become more flexible after some fiddling with them

Printing tips

• Optimized for use in0.2mm floor heightand0.4mm nozzle
• 10% fillerThat's enough, but it's still so expensive100% fillingIt will add weight, and the feel in the hand is very satisfying!
• Component cooling100% fan speed
• The vertical casing is made ofWalls above the second floorTo increase the intensity
• Cura user: In yourShellPlease set it to be disabledNo Skin in Z Gaps

Variant

• Yafic_v2.stl isOriginal version– It’s easy to print and is well-liked by many people
• Yafic_v2_rounded.stl hasRounded edges– It's harder to print, but it feels better in hand
• Yafic_v2_rounded_topjointmod.stl hasThe modified top joint– The printing effect is better on some
• yafic_v2_test.stl is aSmaller test files– Use it to try out the printing settings