This is an engineered structural intervention designed to restore planar alignment and structural integrity to load-bearing bathroom furniture. When OEM (Original Equipment Manufacturer) plastic supports degrade due to material fatigue or environmental stress, this solid-state interface effectively bridges the gap, ensuring a perfectly flat surface for sensitive top-loads like ceramic bathroom sinks.

Engineering Highlights

• Optimized Surface Area: The 50mm diameter provides a wide footprint, drastically reducing point-load stress on the underlying bathroom floor while stabilizing the vanity above.

• Environmental Resistance: Manufactured using PETG, this component is highly resistant to the moisture, humidity, and temperature fluctuations typical of bathroom environments, preventing the degradation seen in traditional wood or metal shims.

• Static Load Transfer: The 10mm Z-height acts as a precise, solid compressive member, transferring the weight of the furniture and sink directly to the floor without lateral deflection.

Technical Specifications

1. Geometry: Cylindrical (50mm Diameter, 10mm Z-Height).

2. Material: PETG (Polyethylene Terephthalate Glycol) – selected for its superior impact resistance, sustained compressive strength, and high moisture tolerance.

3. Application: Furniture leveling, structural load distribution, OEM leg replacement.

4. Recommended Print Settings:

   • Infill: High density (50% - 100%) for maximum compressive strength.

   • Perimeters: Minimum of 4-6 walls to resist lateral compression forces.