This is a case to clamp the MiLi MiTag to flat surfaces and prevent people and objects from pressing on the tag and/ or messing with it.
It can be clamped to straps/textiles/panels.

Requires:
4* M3*16 DIN912 Socket Head Cap Screws
4* M3 Brass heatstake inserts (Voron standard size) - M3*D5.0*L4.0

note that the heat sets are going into the flat sided chamfered part (clamp) while the screw heads are going on the chamfered part that contains the tag (case top).