Custom enclosure for Raspberry Pi 2 paired with a 2.5" SSD — my compact, Linux-powered replacement for the outdated router Airport Time Capsule.

• External USB-C power port wired internally to the board — no messy cables sticking out.
• The 2.5" SSD replaces the top cover and connects via USB adapter.
• Video/audio ports on the side are sealed; microSD card slot remains fully accessible.
• Pi board secured to the case with plastic screws that self-tap into printed threads.

Purpose-built for silent, efficient NAS operation with zero clutter.

--

What You'll Need: Tools, Parts & Supplies

Core Components

• Raspberry Pi 2/3 Model B
• 2.5" SATA SSD
• USB to SATA adapter (no external power)

Assembly Hardware

• 4× plastic M3 screws
• 4× HDD screws
• Internal USB-C power connector + wires (to connect to 5V/GND pins)
• 2× M2 countersunk screws + 2× M2 nuts (for power connector mounting)

Tools

• 3D printer :)
• M3 tap (to thread the printed holes)
• Soldering iron
• Screwdrivers
• Wire strippers

All in, ~30 mins to assemble once printed. Simple and tidy.