Hi folks , i saw on the internet ,they sell for 10 euro these sliders .
in bad 3d print and ect. i had furniture sliders found for 1 euro in the cheap shop.
25mm round and 6mm high.
so i made my own , it cost in total 2 euro, design time was 25 min.
if you want design self one , the pad should be at 5 degrees, mine is 5,27degr.
it sticks with 3M doublesided-tape,
enjoy printing and give like please ,

Anycubic

All-metal Mega

No

No

0.20

40%

my standard settings 3perrimeters and 3 layers bottom and top.
nozzle .040