just a simple mount and spacer setup to allow the lcd to be securely mounted somewhere other than the crossmember of the i3 pro B.

in my case I intend to use a lack table enclosure eventually so Ill want the lcd positioned outside, screw mounted to the front-top of the enclosure.

mount legs are attached using the same fixing technique used throughout the rest of the frame (again those spare bolts and nuts from initial assembly come in handy)

Ive also included a additional design for a tilted mount in case anyone wishes to mount their lcd lower down than standard but still wishes to be able to clearly see the display.

both designs incorporate a guide slot for the SD card which generally makes the insertion and removal of the card alot easier than stock setup (you dont have to guess the slot location or strain around the side to see were the card needs to go)

ps.... ignore the little thin bits that can be seen int the STL images, they dont appear on the printed parts once theyve been sliced and printed.

Geeetech Prusa i3 pro B

No

No

0.3

30%