• Do not change the orientation of the parts.

• I printed with PLA at 0.2mm/layer.

• Use high-quality PLA - avoid matte PLA as it is not very flexible, especially for the spring. -

•  Let the parts cool down well before assembling everything – if you’re in a hurry, place them in the freezer before assembly – assembling with hot parts and stressing the spring and trigger will alter the tolerances – don’t do it

  
  The Mechanical Dice is a mechanical device shaped like a pocket watch, fully 3D-printed. Its refined design evokes the classic style of a pocket watch, featuring a circular case with elegant details. At the center of the top, there is a button: when pressed, it activates an internal wheel with the faces of a standard die (numbers 1 to 6). The wheel spins as long as the button is held down and stops instantly upon release, revealing a random die face.
  
   

Recommended settings:
- Layer height: 0.2 mm
- Supports: NOT required
- Infill: standard
- Quality profile: standard Bambu Lab

🚀 SUPPORT & BOOST

If you like this model and it worked well for you, please consider:
⭐ Leaving a LIKE
📌 BOOSTING the model on MakerWorld
🗨 Sharing feedback or photos of your print

Even a small action helps this project grow and allows me to keep releasing high-quality designs.