The Frankensteiner adjusted for E3Dv6 hotends.

There are two versions; one for the standard shaped E3Dv6 and one for the hexagonal shaped version.
Please note that you need to print out the Main-body and the Mount part.

Also included is a fan adapter so you can use a 30mm fan instead of the stock 40mm fan for the hotend. It is a simple adapter that you can just plug into the holes for the 40mm fan.

Note that this design is for the MegaZero 1.0

==
Backstory

User lexucd wanted to use the Frankenstein for his E3DV6 Upgrade Bowden Hexagon, see MZ group post here:
https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:52622

The original Frankenstein can be found here:
https://www.thingiverse.com/thing:4709536

===

Update 27-09-2025: Added 1.5mm lowered versions (Frankenstein for standard E3DV6-Main body---Rev02---lowered 1.5mm.STL & Frankenstein for E3DV6 hex hotend-Main-body---Rev05---lowered 1.5mm.STL) as requested in the comments by @leksus300

Update 26-09-2025: Added STEP files for remix.