This is a mini version of my Flexy Stick Figure. This is a stick figure that you can make out of silicone or TPU. It is fun to fidget and play with and has a simple look to it. The mold box for this version has been completely redone to work better at the smaller scale.

If you use the 3D printed mold box, you will need only around 4 to 5 mL of your silicone solution to pour in. 15A is a good silicone thickness. I also recommend printing the two parts of the mold box vertically to get as much detail as possible (all the files should already be in the correct orientations for printing), and it still won't need any supports when printed like this. Make sure to also clamp the two parts of the mold box together before pouring the silicone. Tip: Using a syringe can make it easier to pour the silicone into the hole at the top of the mold box.

For TPU, I am still experimenting. For this method, use the "TPU_Mini_Flexyman" file. For what I have found so far, use TPU filament softer than 90A and use 2 or 3 wall loops with no infill. Use a brim if you think your printer will need it.

Most accessories made for The Flexy Stick Figure should still be compatible with this model if you shrink them to 50% scale and enable the “detect thin walls” setting.

Check out the original, normal-sized Flexy Stick Figure here.

Check out the entire Flexyman collection here.