Summary I needed a means of holding a 7" Android tablet in the shop where I could see and interact with it while using a milling machine. (The tablet displays readouts from the milling machine.) This holder serves this function nicely. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: .200mm Infill: 20% Cubic Notes: Printer model is really an i3 MK2 (but this wasn't one of the choices.) Two "Tablet Holders" and one each of the braces will need to be printed. Post-Printing To assemble, 8 #6-32 x3/8" button head screws and 8 #6-32 nuts are needed. I also mounted rubber feet to the bottom to reduce the tendancy to slide will interacting with the tablet, How I Designed This The design was laid down in 2D and then extruded to 3D. Screw holes and nut pockets added after extrusion. Design tool was TurboCAD 21.