Here is a Camera Mount for the Raspberry Pi Camera Module.
It attaches to the Da Vinci Frame using a M3 Nut & Bolt.

Requires:
~ 1 x M3 - 16mm (Minimum)
~ 1 x M3 - 8mm (Size is not important here, just a small M3 Screw)
~ 2 x M3 Nuts

Camera Module: https://www.adafruit.com/products/1367
24" Flex Cable: https://www.adafruit.com/products/1731

If you like what I've done, please consider sending a donation:
https://www.paypal.me/cherven

NOTE: if you have trouble getting the ball to print, try printing two of them at the same time. (It's a cooling issue)

I printed mine at 0.13mm Layer Height, with support.