Summary

This desk mount is compatible with Thrustmaster (I've only tried the TCA Sidestick but I believe the T16000m and SOL-R are the same mount) and the VKB Gladiator NXT or anything else that uses the same base.

It has a static drop of 70mm from the desk.

It barely fits on the buildplate of my Creality CR-20 which is the same size as an Ender 3 so it should work for most people. It's optimised for printing on it's side.

My neighbour confirmed that he was able to fit it on the build plate of his BambuLabs P1S

I've printed 2 so far, one with 0.2mm layer height and one with 0.12, the latter had much better bridging but I think my printer's bridging is pretty poor overall, I'll be interested to see how it goes on a better printer.

I've printed using 4 walls, 5 initial bottom layers and 5 tops with 7 other bottom layers (bridges).

I've used Cubic subdivision to keep the infill down but still provide plenty of support for top layers. I think "Adaptive infill" or something is the bambu setting.

With these settings the main body was weighing in at around 360 grams.

The screws should be printed with the with the finger tightening part facing up, I've included a model with a break off support if you are like me and have a bed-slinger printer.

If you really want a specific drop other than 70mm let me know and I can probably modify and add the file here.

Onshape model: https://cad.onshape.com/documents/491a412cdf5eaaecc3b7e389/w/386d30642ca09afc46cebf52/e/7919882af61e7b93e0ddbea0?renderMode=0&uiState=683e3ac91cfc0c27d93dc844
if you want to modify it (should be able to adjust the drop from the table to be bigger smaller without too much effort if you know what you're doing)