Figurine of a spooky mini mummy.

https://youtu.be/luEPzzd2XFM
 

Printing

• Can be printed in both FDM and resin
• Supports are required under arms and loose bandage
• Minimal infill required

Split Model

Use the split model (or split it yourself using PrusaSlicer) for a cleaner print with fewer supports.

Alternate Model

An alternate model is available without the loose drooping band. Use this if you want a print without that easily snapped part.

All Sculptember Models

• Ghost
• Mummy
• Frankenstein
• Werewolf
• Dracula
• Mere-Monster
• Witch
• Skeleton
• Slime Creature
• Gargoyle

More Customization

Check out the STL Twister by Andrew Sink to put a custom twist on this model.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

Recommended Attribution Text

"Sculptember Mini Mummy" (https://3dprinty.xyz/project/86) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).