Spool Deflector for Ender 5 MAX — Reusable Spools Fix
SlyGong
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-03-19 18:02:18
0
0
000설명
모델 소스
리뷰(0)
Reusable / refillable filament spools (Sunlu, Bambu Lab, eSun, etc.) have openings in their flanges. On the Ender 5 Max stock spool holder, these openings can catch on the mounting screws that secure the holder — causing the spool to jam, stop spinning, and potentially lead to under-extrusion or failed prints.
This deflector mounts on the spool holder and acts as a smooth guide, preventing the spool flanges from catching on the screws. It ensures consistent, friction-free rotation throughout the entire print.
Features:
- Designed specifically for the Creality Ender 5 Max stock spool holder
- Prevents flange openings from catching on holder mounting screws
- Compatible with all spools (Sunlu, Bambu Lab, eSun, ******…)
- Quick install
- Lightweight, minimal material usage
- Print-in-place — no assembly required
Recommended Print Settings:
- Filament: PLA (or any you want)
- Nozzle: 0.4 mm (standard)
- Layer Height: 0.2 mm
- Wall Count: 3
- Infill: 10% Gyroid
- Supports: Yes (on the buildplate)
- Brim / Raft: No
- Estimated Print Time: 20 minutes
- Estimated Filament: < 10 g
Compatibility:
Printer: Creality Ender 5 Max (stock spool holder)
Tested spools: Sunlu refillable, Bambu Lab refillable, eSun reusable
May also work with other reusable spools with openings in their flanges
Installation:
- Designed specifically for the Creality Ender 5 Max stock spool holder
- Prevents flange openings from catching on holder mounting screws
- Compatible with all spools (Sunlu, Bambu Lab, eSun, ******…)
- Quick install
- Lightweight, minimal material usage
- Print-in-place — no assembly required
Recommended Print Settings:
- Filament: PLA (or any you want)
- Nozzle: 0.4 mm (standard)
- Layer Height: 0.2 mm
- Wall Count: 3
- Infill: 10% Gyroid
- Supports: Yes (on the buildplate)
- Brim / Raft: No
- Estimated Print Time: 20 minutes
- Estimated Filament: < 10 g
Compatibility:
Printer: Creality Ender 5 Max (stock spool holder)
Tested spools: Sunlu refillable, Bambu Lab refillable, eSun reusable
May also work with other reusable spools with openings in their flanges
Installation:
- Remove the filament spool from the holder.
- Unscrew the spool holder
- Place the deflector onto the spool holder.
- Screw the holder back
- Place the spool back on the holder.
- Done — enjoy smooth, snag-free printing!
- Done — enjoy smooth, snag-free printing!
모델 소스
원본 링크: 자세히 보기
CC BY