Description

This adorable axolotl-shaped hideout combines functionality with charm! Designed as an aquarium decoration and shelter, this piece features a smiling axolotl with characteristic external gills and limbs. The hollow interior provides a cozy hiding spot for small aquatic pets, while the entrance tunnel allows easy access. The cheerful expression and anatomically-inspired details make this both a practical habitat accessory and a delightful decorative element for any aquarium setup.

Print Settings

Layer Height: 0.2mm (0.12mm for finer details on the face)

Infill: 15-20% (gyroid or grid pattern recommended)

Supports: Yes - needed for the gills, limbs, and overhangs on the body

Support Type: Tree supports or standard supports with 5mm support distance

Wall Line Count: 3-4 walls for strength and water-tightness

Top/Bottom Layers: 4-5 layers

Print Speed: 50mm/s (slower for better surface quality)

Nozzle Temperature: 200-210°C (PLA) / adjust for material used

Bed Temperature: 60°C (PLA)

Cooling: 100% fan after first layer

Orientation: Print with the bottom flat on the bed, face looking forward

Adhesion: Brim recommended for stability

Material: PLA, PETG (aquarium-safe), or food-safe filament if housing aquatic animals

Post-Processing: Remove supports carefully, sand any rough edges, and thoroughly wash before placing in water. For aquarium use, ensure filament is non-toxic and allow several days of soaking with water changes before introducing animals.

Estimated Print Time: 8-12 hours (depending on size and settings)