This case is optimized to print in PLA and has not been tested with ABS. Previous designs I tried proved too thin to be practical with PLA. This case is the first I have been happy with after several design iterations. It is still a work in progress and I welcome your input. Please feel free to comment any and all suggestions you might have.

This file includes 4 .15mm circle supports on the corners of the case. These will need to be removed after printing but are well worth the effort. They will help to insure your case stays on the build plate through the entire print as well as prevent warping.

Recommended Print Settings:

Layer Height: .15
Infil: 100%
Shells: 1
Raft: No
Support: No

Our Printer & Software

Printer: Makerbot Replicator 2

Temperature: 225c

Filament: 3rd Party Vendor

Build Plate: Glass W/ Painters Tape

Slicer: Makerware