Print with 100% infill, with a layer height of 0.08 mm and a base layer of 0.16 mm

The model size is 142.91x200mm.

You can print at a higher layer height of less than 0.48 mm at the minimum depth.

The maximum depth is 2.2mm, and the actual depth is 2.2mm.

The filament used:

PLA Smartfil Black, transmission distance: 0.4

PLA BambuLab Basic Gray, transmission distance: 2

PLA smart filament, white. Transmission distance: 6 meters.

This print uses three unique fine filaments

Swap Description:

Starting with the blacks

At the #9 layer

At the #14 layer