Don't change the Z height. For ease of use, I suggest unchecking "UNIFORM SCALE" and only changing the X and Y percentages when editing the size;

Print with 100% infill, with a layer height of 0.08 mm and a base layer of 0.16 mm

You can print at a higher layer height of less than 0.48 mm at the minimum depth.

The maximum depth is 2.2mm, and the actual depth is 2.2mm.

The filament used:

PLA BambuLab matte charcoal transmission distance: 0.6

PLA BambuLab matte scarlet red. Transmission distance: 2

PLA BambuLab Matte Lemon Yellow. Transmission distance: 4

PLA BambuLab matte ivory white. Transmission distance: 3.5

This print uses 4 unique filaments

Swap Description:

Starting with charcoal

At the #17 layer

At the #21 layer

On the #23 layer