End cap pieces for the IKEA Skydrag linear shelf lights to allow magnets to be inserted either from the top or the side to allow non-destructive mounting of the lights.

Uses the great mount geometry from @stephenbriggs_529843 as the base which fits the light very well. Sized for 10x8mm magnets with a press fit though your printer tolerances are likely different to mine so may require adjustment.

If you wish to change the diameter or depth of the magnets used you can do so in the parametric Onshape model here:

https://cad.onshape.com/documents/e021cf2e1d303668c8bc082d/w/1520f47cc5478a3d024a16eb/e/f4cad2673c4330b0f94f2d09

Those two parameters are broken out as configuration items which can be changed. You can also easily suppress other items if you don't need them (e.g., change to have only one insertion direction).