Project: asuka.hfp
Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 170x95.74mm.
You can print with a higher layer height at a minimum depth of 0.48 mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

The wires used:
PLA PolyLite, black. Transmission distance: 0.3
PLA PolyTerra military blue. Transmission distance: 0.3
PLA BambuLab Basic Red. Transmission distance: 5
PLA BambuLab Basic Brown. Transmission distance: 2
PLA PolyTerra Sunrise Orange, Transmission Distance: 2
PLA BambuLab Basic Beige. Transmission distance: 8
PLA PolyLite, white. Transmission distance: 5
This print uses 7 unique filament types

Replacement instructions:
Starting with black
Replace it with military blue on the 8th layer
Replace it with red on the 9th layer
Replace it with brown on the 13th layer
Replace it with sunrise orange on the 21st layer
Replace it with beige on the 23rd floor
On the 26th floor