Rambo movie prop knife

This is a 3D-printed replica inspired by the knife in the movie Rambo.
It's easy to print, but it requires some assembly.

Explanation:

• All pins have a built-in diameter tolerance of 0.1 mm, and there is an additional tolerance in the length direction.
• It includes a screw designed to be printed horizontally and vertically. The vertical version may be too tight and may break along the layer lines.
• It includes two handle sleeves:
  • It's very close-knit.
  • The other one has built-in tolerances.
  • Both have the same external dimensions.

Assembly steps:

1. Assemble the blade using 9 small pins.
2. Put the protective gloves on the bottom of the blade.
3. Connect three large pins to one half of the handle.
4. Insert the assembled blade and screws into one half of the handle.
5. Merge it with the other half of the handle.
6. Slide the selected sleeve onto the handle.
7. Screw the decorative cap into the end of the handle.