A colorful melting pot of day and night

Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 150x150mm.
For depths below 0.48 mm, you can use a higher layer height for printing
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
Bambu Lab basic black PLA, light transmission distance: 0.6
Bambu Lab basic blue-grey PLA, light transmission distance: 3
Bambu Lab basic orange PLA, light transmission distance: 5
Bambu Lab basic white PLA, light transmission distance: 5
This printer uses four unique consumables

!!!! Note: It seems that you are mixing different types of consumables. Please confirm that this is what you want.!!!!

Switching instructions:
Start with black
Switch to blue-grey on the 9th layer
Switch to orange on the 12th layer
Switch to white on the 20th layer