The Tardigrade SD CARD Servant! A Water-Bear Servant to hold your Standard and Micro SD / SDHC CARDS! There are 8 slots in total, 5 slots for standard size cards, and 3 slots for micro sized cards. The slots blend seamlessly into the creases of the Bear's back. The Bear also features an open snout, perfect for holding a thin pencil or stick! And just like MAGIC, the SD cards and sticks on your desk are organized all in one place, all thanks to the help of a neat little Tardigrade friend! If the Model Download Button isn't working, you may Download the Model on the Alternative Site in the link below, Thanks: Please Download Here Instead if Download Isn't Working. --------------------- Recommended Print Settings. 0.1mm Layer Resolution, 15% Infill, Skirt. Please Note, that the Micro SD card slots were a pinch too small for housing the bottom base of the micro SD cards, however increasing the size of the model by around 2% should remedy that slight error. Thank you for your review and understanding. (: