Easy print, minimal materials, no supports. My print settings are default for Bambu / P1P:

• 0.4mm nozzle

• 0.2mm layer height

• PLA, PETG, ABS - whatever you want

• Stand it up as shown in gallery

Parameterized Fuzion360 file is also provided, to adjust for your specific doorstop. The only thing not fully parametrized is the spacing and number of screw holes, but the size can be adjusted. See screenshot for available parameters.

Attachment

• Screws (for rough surfaces / heavier doorstops / you like to overbuild things)

• 3M (if you have a smooth wall, a couple 3M poster hangers would probably hold most doorstops)