Pop Vinyl Display Wall Bracket – Version 2 (Prototype / Display Grade)

This is Version 2 of a modular wall-mounted display bracket designed specifically for boxed Pop Vinyl figures. The goal of this design is to balance structural support with visibility, allowing the figure to be securely displayed while still showcasing the front and side artwork of the box.

This iteration focuses on a minimal-support, print-efficient structure that can be produced without supports on most FDM printers. The open-sided design and angled supports help maintain visibility while reducing material usage and print time compared to fully enclosed designs.

Key Features:

• Support-free print design (tested with standard FDM settings)

• Open side windows to preserve box artwork visibility

• Integrated angled supports for basic structural reinforcement

• Designed to hold standard-size boxed figures securely in place

• Lightweight and material-efficient

Important Notes:

• This version is intended for display purposes only and is not designed for heavy load-bearing applications

• Some flex may occur under higher weight; best used with lightweight items such as collectible figures

• Box tolerances may vary—older or slightly deformed boxes may fit tightly

• Recommended to allow slight additional clearance if modifying the design

Print Recommendations:

• Layer height: 0.2 mm or higher

• Infill: 10–15% (gyroid or similar)

• Walls: 3–4 perimeters for strength

• No supports required

Future Improvements (Planned):

• Improved front rigidity to reduce flex

• Exploration of modular/multi-part assembly for enhanced strength and faster print times

This model represents an early functional prototype and is part of an ongoing design process focused on modular, scalable display systems.