These are the models for an interactive installment to promote political awareness to youths. This was programmed in the Arduino IDE but made compatible with the ESP32 microcontroller and intended to be paired with the Adafruit Mini Thermal Receipt Printer: ID 597. But the printing parameters can be changed for other thermal printers.

An operator is intended to remote into an android phone or raspberry pi or pc nearby to pilot the device using a serial cli terminal.

The code is found here: https://github.com/Victor2266/RedButton-Project

Creality

Ender 3

No

Yes

0.28

30%+

Print the box upside down with the top surface on the print bed to minimize the support needed.

The button is from amazon: https://www.amazon.ca/EG-Starts-Illuminated-Buttons-Machine/dp/B01LZMANZ7/ref=pd_lpo_1?pd_rd_i=B01LZMANZ7&psc=1
it is secured with the bolt that came with it and the printed part in picture 3.

The box brackets are for securing a wooden box to a table so the whole thing can be locked down.