3D printed brackets to mount some cheap weather station sensors. The sensors I got were from Maplin in the UK.

I used the following sensors: Anemometer Wind vane Rain gauge Vertical pole

16mm dia Aluminium tube from B&Q

I used the 16mm Aluminium tube for the horizontal tube and the Mapline 20mm dia tube for the vertical post.

I designed and 3D printed the following brackets.

• Mounting bracket the the Anemometer
• Mounting Bracket for the Wind Vane
• Mounting bracket for the rain sensor
• Base bracket to support the vertical post

• Bracket to connect the horizontal and vertical post Print Settings

Printer:

Velleman K8200

Rafts:

**Supports:**

No

Resolution:

**Infill:**

30%

Category: Other