Abstract

This is the standard specimen for the IZOD notch impact test, which uses a thickness of 6.4 mm, rather than the original 3.2 mm version. Since there are differences in the relevant standards I have consulted, if you find any inappropriate aspects, please feel free to leave a comment and provide feedback at any time!

Print settings

Printing brand:

• Printing brand:

  Anycubic

• Printing model:

  Photon

• Base plate support:

  None

• Supporting structure:

  None

• Layer thickness:

  50 micrometers

• Fill density:

  100%

• Remark:

  Please note that the notch radius of the sample is relatively small, so the printing effect may not be ideal—but this is inherent to the test itself. For resin 3D printers, this problem generally won't pose any obstacles.