This is a Gridfinity bin to hold a Battletech Mech. It has a 6x2mm magnet hole in the bottom of the base should you wish to use it. The cutout was sized to tightly fit the standard Battletech hex bases, you may need to push down on the mini a little to get it in. 3d printed bases may be more or less loose.

Two versions are included. A "standard" tall wall version and a "short" wall version.

Base bin was generated using https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0

Printed using PLA+ with a 0.4mm nozzle with the following settings

• 0.2mm Layer Height

• 15% Infill

• Cross-Hatch Infill