Milwaukee M18 Impact Holster (with Magnet Slots)
 

Milwaukee M18 Impact Holster (with Magnet Slots)
This holster is designed to securely hold Milwaukee M18 impact drivers and similar-sized tools. The interior handle channel is 1.875" wide, and the overall holster body measures 3.75" × 3.75", giving plenty of clearance while keeping the tool firmly in place.

The top includes ten 1/2" disc magnet slots so you can glue in ceramic disc magnets or rare-earth magnets for additional retention. Four integrated screw holes are located in the center magnet slots, sized at 0.20" to fit #8 wood screws or #10 screws for mounting to walls, carts, or workbenches.

(The model in the live pictures is the V1 version. Not V2, please take note of V2). 

Recommended Print Settings:

Material: ABS, ASA, Nylon, PETG or any high-strength filament

Infill: 100% for maximum durability or 60-80% Gyroid

Print Orientation: Handle Slot Facing Up

Temperature (ABS/ASA)

Nozzle: 245–255°C

Bed: 95–110°C

Enclosure recommended

Fan: OFF for stronger layer adhesion

Temperature (PETG)

Nozzle: 235–245°C

Bed: 75–85°C

Minimal fan

Temperature (Nylon)

Nozzle: 250-265°C (depends on brand)

Bed: 70-90°C

Fan: OFF for stronger layer adhesion