This is a wall support for a electric scooter. It keeps less place vertically!

I've made it for a Hikerboy Foxtrot plus but I think you can use it with another brand : you need to have 10" wheel and disc brake.

Keep the same color as the electric scooter for printing the 2 parts, have a very good WAF ;)

Longer

Longer LK4 Pro

Doesn't Matter

Yes

0.2

30-50

fix part

• Print the fix part with 30% infill cubic
• Support is needed for the hole on my printer to have a good circle. You need to drill the hole after that with a 7.5mm drill bit.
• The screw hole is for 4mm (8mm head)

rotate part

• Print this part with 50% infill cubic
• Print it in 140% "line width" nozzle to increase the solidity. It means for a classic 0.4mm, configure cura to print at 0.56. See CNC kitchen video about it
• support is needed