Is your Ender 3 a rebellious "little devil"? Use this devil horn end cover to fully showcase its unique personality! This end cover is specifically designed to replace the 20x20 aluminum V-groove profile end cover on the Creality Ender 3, and is also suitable for any 3D printer with a similar profile structure on the top of the X-axis gantry frame.

I printed at an outer contour speed of 60mm/s and an inner contour speed of 70mm/s, with a nozzle temperature set to 200°C and a bed temperature of 55°C. The layer height was 0.2mm, and a 0.4mm nozzle was used. I did not use a build plate or side supports, and only enabled organic supports on the build platform. During printing, I used a 4-layer horizontal layout and a 4-layer vertical layout, with a fill rate of 0%. Please print in the direction shown in the diagram.

The devil always likes to keep idle hands busy...