To reduce the PC noise entering the SDR-RTL through the USB interface and antenna, it is recommended not to install the RTL-SDR directly on the USB interface of the PC or other USB host

When using this installation method and connecting a long antenna, the RTL-SDR may tip over. To address this issue, I specifically designed a simple stand that effectively prevents this from happening.

This bracket is specifically designed for the RTL-SDR V3 produced by www.rtl-sdr.com. You can also adapt it to other models of RTL-SDR converters as needed. The specific method is described below.

As always, I've attached the OpenSCAD source files for you to modify or optimize on your own:

• Fromhttps://www.openscad.orgDownload and install OpenSCAD.
• Launch OpenSCAD and open the attached OpenSCAD source file
• You can adjust the various parameters at the top of the source file and even directly modify the code.
• Save your changes
• Render the design model
• Export the rendered model to formats such as STL files
• Carry out slicing processing and print the model.

For more of my design works, please visit:
https://www.thingiverse.com/thinger13/designs