I wanted a basic mount for my drivers from Adafruit to keep them from shorting on random stuff on my desk. There wasn't one online. I made one. STEP file attached if you want to tweak it.

Not affiliated with Adafruit. Basic mounts for the Adafruit TMC2209 driver. Model based on the CAD located in the Adafruit github herehttps://github.com/adafruit/Adafruit_CAD_Parts/tree/main/6121%20TMC2209%20Driver

The part allows for the use of either M2 heatset inserts or M2 nuts, or both if you really want to for some reason. It should work with M2 4-8mm screws; you probably want the 6 or 8mm if you're using M2 nuts. 

There is a “dual” version if you want to run two drivers side by side. 

Add holes or whatever if you intend to mount the mount onto something like a ¼-20 plate. 

These do not have the fancy prusa-like holes, so you probably want supports. I usually just pop out the support material with a driver after.