Printing these parts at 266% will allow you to fit three 15 x 3mm Neodymium magnets in the holes in the beak & feet (I used these exact magnets: https://www.amazon.com/gp/product/B09LCJ4YPR - meaning the goose will be much more firm with its "grip". Works even better if you attach it to something metal!

I kept the parts at original scale so that you can use the parts interchangeably with other versions of the Entitled Goose.

I lost the .STLs for the beak magnet cover & foot covers, so I recreated them - I'm not sure if the depth is correct (0.5mm) - but change the depth if it is too thick/thin. I haven't been able to test these parts again yet.

Creality

Ender 3 Pro

No

No

50%

I used the High Quality Preset on CURA for my Ender 3 Pro. I filed down all the rough edges (on the white parts) with files from Walmart to make it look matte, but you may have an easier time starting off matte. I'd still file down the rough edges to make it smooth, but that's just me.