Simple folding table to be installed above table next to main door. Wall is at an angle so bracket needed to sit level. Also I didn't want it to be supported by nut-rivets in aluminum wall alone, so it also connects to steel frame at top.

For strength and temperatures expected I used PETG. Also printed solid since I wanted as strong as possible. So far so good!

Will need to print two.

Bracket: https://www.amazon.com/dp/B09M6N8G3B?psc=1&ref=ppx_yo2ov_dt_b_product_details

Top: https://www.amazon.com/dp/B07D1L73S3?psc=1&ref=ppx_yo2ov_dt_b_product_details

Folding Bracket Bolts: Socket head cap M6 screws I had laying around

Folding Bracket Nuts: https://www.mcmaster.com/97258A104/

Printed Bracket to Wall Bolts: https://www.mcmaster.com/97654A229/

Printed Bracket to Wall Nuts: https://www.mcmaster.com/97467A693/

Post Processing:

Might have to ream out the holes with drill. Also had to tap in the square nuts with hammer and punch.