I originally wanted to find a shelf to put some soda cans on. But I could only find one with a lot of brackets on the market, and its size was so small that it couldn't hold 12 cans of soda at all.

When printing according to the dimensions shown in the diagram, the finished product will be 22×12×4 centimeters; however, you can increase the number of layers as needed, just by printing a stepped support structure for each layer separately.

Print settings:

Layer thickness: 0.3 mm

Fill density: 15%

There are several small screw holes in the center of the front of the model. These screw holes are purely decorative and only need to be paired with small screws with a diameter of about 0.3–0.4 mm - just like the kind of screws often used when installing hooks on photo frames.