Summary

This model was created entirely in the VR app Gravity Sketch using the Oculus Quest 2 headset and its controllers. Then I saved it on my Landingpad account and uploaded it here on Thingiverse after having tested printing it 2 times.
It was printed with my Ultimaker 3 Extended. It was printed both with 4 mm and 8 mm in fast quality (2mm) and the results were satisfying. 8 mm gave a more solid product in a not bad print quality. Infill from 10% to 20% depending on the strength you prefer to have. No supports are needed and no raft (unless you prefer to add one). The texture I added on Gravity Sketch to this model gave the print an interesting skin effect...

Good luck

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 3 Extended

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.15 mm but 0.2 mm is ok too

Infill:

20% is good

Filament: Anyone, though Ultimaker is better when using the same brand for printers PLA (you can use ABS or nylon or any other material. It all depends on what you want exactly. Quality of print, solidity...) I printed it in white color, but you are free to use the color you prefer and have

Notes:

If used Gravity sketch, or Landingpad or any other related program that allows to go from virtual to real, don't hesitate to contact me. Thanks

모델 소스

원본 링크: 자세히 보기

CC BY

Summary

Print Settings

태그

모델 소스

관련 추천