Printing Instructions

• Print Mode: Standard printing (not vase mode)

• Wall Thickness: 2–3 perimeters recommended

• Layer Height: 0.16–0.20 mm for best watertight results

• Top Layers: 4–5

• Bottom Layers: 4–5 for strength

• Infill: 0–10% (zero is fine because walls provide strength)

• Supports: Not required

• Material: PLA or PETG

• Nozzle: 0.4 mm

• Cooling: 100% for PLA

For Water-Holding Use:
To make the vase watertight:

• Use a lower layer height (0.16–0.20 mm)

• Increase flow rate to 103–105% if micro-gaps appear

• Optional: Apply a food-safe sealant inside for guaranteed water sealing

Notes:
The vase scales well in all directions. Because the walls are solid, it remains stable even at larger sizes.