After many attempts, I finally designed a set of solutions that I think are the most ideal: keeping the desktop clean and orderly, and cleverly storing all components in drawers, which is well-organized and clear at a glance.

I've currently used this design to organize most of my electronic components, and the results have been excellent. I highly recommend you give it a try too!

When printing, you need to prepare 12 M3 screws, and the minimum length of the screws should be 10mm. Then, with the help of the 12 nuts on the inside, firmly connect the side panels to the drawers.
After tightening the nut to the appropriate torque, I suggest you first use a small amount of glue to temporarily fix the guide rail to the mounting bracket. After this step is completed, use 4 to 8 pieces of 3mm screws to firmly fix the drawer under your desk. If you're interested, you can visit my Instagram account to watch the actual assembly process and gain a direct understanding of the precise assembly positions of each component:https://www.instagram.com/p/CDjxsc4j4HB/https://www.instagram.com/p/CDjxsc4j4HB/

Tips: This drawer is not suitable for carrying heavy items, especially the bottom drawer needs special attention. You can do as I do, placing lightweight items at the bottom of the drawer and arranging heavier devices at the top, which can effectively balance the load and ensure safe use.