This is a mini laptop designed and printed around a 5" display with an Adafruit backpack and a Raspberry Pi 4 with a cooling fan.

Interference found with the screen and screen cover. Both have been revised to revision A, and are available under files!

I came up with a wiring scheme that works. It's actually pretty easy. Use a right angle extension cable from the display to the base, and then use a Y cable in the base. Photo attached. I'll add some amazon links if you need em...

So the screen won't close all the way. I I put a 0.5mm gap in between the keyboard and the display. That should help. Also, some of the metal of the display was showing. So I dropped the top edge down 1.8mm. Grab 5in_screen_b.stl

To be continued...

Parts
5 inch display from Adafruit with backpack
https://www.adafruit.com/product/2232

Flat HDMI cable with 90 degree up angle Micro HDMI connection
https://www.amazon.com/gp/product/B072PVG4B4

(closest keyboard I could find) from Adafruit
someone will have to get me the dimensions so we can fit the base around the keyboard
https://www.adafruit.com/product/922

Y adapter from smarticase.com
https://smarticase.com/collections/all-products/products/smartipi-touch-2-cable-replacement-set

right angle extension cable from Amazon
https://www.amazon.com/dp/B07C2RQ1V5

Power supply
https://www.amazon.com/gp/product/B07TW4Q693

Fan
https://www.amazon.com/gp/product/B08CN7F6BF

4mm x 25mm long button head screws for hinge
https://www.amazon.com/M4-0-70-Button-Socket-Screws-Stainless/dp/B07DVQQ6M3

3mm button head screws for everything else
https://www.amazon.com/gp/product/B06VVQXQYX

8mm long Brass standoffs for mounting the RPI to the base, and then mounting the fan to the standoffs...
https://www.amazon.com/gp/product/B072N84VM3

2.5mm drill and M3x0.5 tap

Superglue for glueing in the M4 nuts.