I designed this for my Dremel 3000 to do some router works.

Without spending 30 USD for Dremel 335 or 231, light weight but enough for my requirement, most of time just acrylic and woods.

This is only designed for 3.175mm/3.2mm cutters.

You need:

M6 Metric Square Nut 2
M6 Screw 15mm 2 or 17mm (use with washer) *2
DREMEL 565 CUTTING GUIDE or any compatible 60mm guide.

Assembly:

1. Glue the "Dremel guide" to the Base.
2. Use M6 Screw to connect two parts.