This is a frame inspired by Kababfpv's toothpick frame. This is a 100mm size quad that accommodates 2.5" props. The frame fits the Amax 1103 motors and crazybee F4 or any other brushless whoop board. It also has 16x16mm mounting.

The pod is inspired by the BoltRC Kraken frame but is a smaller version (small Kraken = squid). It includes a mount for the Caddx EOS2.
I have included the DXF files for carbon fibre cutting as well as STL files for a 3D printed version (it will not fly as well but is a good alternative).

Parts I used where:
-Amax 1103 7500kv motors
-Crazybee F4 pro
-Caddx EOS2
-Atlatl mini 100mw vtx
-Lumenier AXII Micro
-Frsky XM reciever
-65mm kingkong props
-Pololu 5v step up/down regulator S9V11F5
-GNB 450mah 2s xt30

I have included the battery mount I used which was designed by ledroneclub. I would recomend checking his collection of parts and information about this type of quad.
https://www.thingiverse.com/thing:3359505
Additional information can be found at https://kababfpv.com/

I will have the frame on Armattan productions soon.
I will update this thing if I change anything.

UPDATES:

3/23/2019
I have found the camera angle in the pod to be too high. I will update the pod file.