Summary

A basic towel holder with a 30 cm rod that can easily be mounted to a wall.
Use double-sided tape or screws/nails to attach it to the wall.

Parts designed and rendered in Blender.

Print Settings

Printer brand: Creality
Printer: Ender 3 V3

• Rafts: No
• Supports: No
• Infill: Doesn't matter
  (Stronger if you use higher infill)
• Filament material:
  PLA / PETG (for strength)

Print Instructions

Use print settings above

Print two rod holders (part 1), and the rod (parts 2 and 3).
Attach to wall using screws or double-sided tape.

If you would like a longer rod, then scale parts 2 and 3 up, only on the z-axis.

Instructions:

1. Print the parts required.
2. Attach one rod holder onto where one end of the rod should be.
3. Assemble the rod by putting the 2 pieces together to form 1 long rod.
4. Put one end of the assembled rod into the mounted rod holder.
5. Put the other rod holder onto the end of the rod and attach to the wall.